7. Reversing the Door Swing (CWB8420DZ)
The door of this unit can be mounted so it swings open from either the left or right side. It is
delivered with the door opening from the left side. Follow these instructions to reverse the door
swing.
Note: All removed parts must be saved to remount the door in its original position.
1. Lay unit on its back and remove the bottom hinge
○
5 by unscrewing the four lock screws
○
6
(Fig. 1). Gently remove the glass door from the top right hinge and place it on a padded
surface to avoid damage.
2. Unscrew and transfer hinge pin
○
7 and door stopper
○
8 to opposite sides of bottom hinge
(Fig. 2).
3. Remove the top right hinge
○
9 by removing the three screws
○
10 . Pop out the three caps
covering the screw holes on the left side of the cabinet and move them to the right side.
Screw the left top hinge
○
11 ( included with the unit) on the left hand side of the cabinet.
4. Unscrew and transfer the lock bracket
○
13 to the opposite side of glass door (Fig. 4). Also
remove the cap
○
12 covering the three screw holes and transfer it to the opposite side of
door (Fig. 5).
5. Rotate the door 180° and install it on the opposite side of cabinet. Replace the bottom hinge
assembly on the left side of the cabinet by reinstalling the four lock screws.
To Next Page
Loading...
