8.12 Leveling the Door(s) and Hinge Adjustments
1. Lay the unit on its back and loosen the screws
○
1 .
2. Adjust the glass door
○
3
to make sure the door top is parallel with the cabinet top then
tighten the screws.
3. Hinge adjustments are necessary when:
The door gasket is not sealed along the hinge side of the door.
The door gasket is compressed more than 1/16" on the hinge side (causing a poor seal
elsewhere around the top.)
The distance between the door and cabinet is greater at the top than at the bottom, or vice
versa.
4. If one or more of these conditions exist, adjust the hinges to correct the problem. Raising the
hinge side may correct a door sag.
8.13 Replacing the Door Gasket
1.
Open the door and detach the old door gasket
○
2 from the door frame
○
1 by pulling off
the gasket.
2. Attach the new door gasket to the door frame. Be careful not to damage the door and the new
door gasket.
To Next Page
Loading...
