12
Warning: Before you begin, unplug the Refrigerator.
!
Reversing the Door Swing
1. Open the door and using a Phillips screwdriver, remove the bottom screws from the lower hinge.
2. Carefully slide the bottom of the door forward and down, and place it on a padded surface to
prevent damage.
3. Remove the screws from the upper right hinge. Place the upper right hinge in a safe place in case
you need to reverse the door in the future. Remove the plastic caps from the upper left hinge
corner. Install the upper left hinge by fastening the screws through the left hinge to the cabinet.
Insert the plastic caps into the upper right corner.
4. Remove the bushing from the lower hinge.
5. Remove the lower hinge and install on the bottom left side of the cabinet.
To Next Page
Loading...
Need help?
General
