EdgeStar IF80SS User Manual (English)

Questions and Answers:

P
Patrick NicholsJul 30, 2025
How to troubleshoot no power on my EdgeStar IF80SS?
- S
  Sophia GonzalezJul 30, 2025
  If your EdgeStar Ice Maker isn't getting power, start by ensuring it's properly plugged into a working outlet. If the outlet is functional, verify that the ice maker's power switch is in the ON position; the power indicator light should illuminate. Also, make sure the circuit can provide sufficient power by checking the product label for power requirements. If these steps don't resolve the issue, it could indicate a hardware malfunction, in which case you should contact EdgeStar support.
M
Michael JonesAug 4, 2025
What to do if the 'Add Water' light is on even though my EdgeStar IF80SS is full?
- J
  Jackson BartlettAug 4, 2025
  If the 'Add Water' light remains on your EdgeStar Ice Maker even when full, it may be due to the water's purity level. Distilled, reverse osmosis (RO), or purified water might not have enough impurities for the unit to detect it. Try adding a small pinch of salt to introduce minerals. Also, the water inlet valve may be clogged, so try cleaning it with a plastic bristled brush.
N
Noah StevensAug 9, 2025
Why is my EdgeStar Ice Maker unresponsive to the control panel?
- A
  amanda38Aug 10, 2025
  If your EdgeStar Ice Maker's power and ice size indicators are on, but the control panel isn't responding, first check if the unit is in standby mode. If the power light is blinking, press the On/Off button until the light turns on steadily. If that doesn't work, try resetting the circuit board by unplugging the unit for an hour, then plugging it back in and pressing the power button. If the control panel still doesn't respond after resetting, contact EdgeStar support, as you may have a faulty control panel.
A
anthonybrownAug 15, 2025
What to do if my EdgeStar IF80SS Ice Maker is leaking water?
- E
  Elizabeth GibbsAug 15, 2025
  If your EdgeStar Ice Maker is leaking water, first ensure the bottom drain plug is securely attached. If it's missing, you may need to contact EdgeStar to purchase a replacement. If the drain plug is correctly attached, an internal hose may have become dislodged or disconnected, in this case you should contact EdgeStar support.
M
Margaret PierceAug 19, 2025
Why is my EdgeStar IF80SS Ice Maker not making ice or producing thin ice?
- A
  Ashlee AndrewsAug 19, 2025
  If your EdgeStar Ice Maker is producing little or no ice despite running, it might be due to the room or water temperature being too high. Ensure the unit is operating in a room between 50°F and 90°F. If the room is too warm, move the unit to a cooler environment. If problem persists, contact EdgeStar support, because the fan may not be turning on to cool down the condenser coils.
K
Kimberly HendricksAug 25, 2025
Why is my EdgeStar Ice Maker making noise?
- T
  Theresa HendersonAug 25, 2025
  If your EdgeStar Ice Maker is making noise during operation, make sure the unit is level. If the unit is level and the noise persists, consult the “Normal Sounds” section of this owner’s manual. A loud knocking or metallic pinging noise may be caused by a damaged compressor, in this case you should contact EdgeStar support.