EdgeStar IP211SS User Manual (English)

Questions and Answers:

C
christinaadamsJul 30, 2025
How to troubleshoot no power on my EdgeStar Ice Maker?
- T
  Tara GoldenJul 31, 2025
  If your EdgeStar Ice Maker isn't getting power, start by plugging it in. If it's already plugged in, check if the power switch is turned OFF and press the power button to turn it ON, ensuring the Power Indicator light illuminates. Also, test the power outlet with another device to confirm it's working. If the outlet is faulty, try a different one. If the issue persists even with sufficient power, it may indicate a hardware malfunction, and you should contact EdgeStar support.
R
Robert SteeleAug 4, 2025
What to do if the 'Add Water' light is on when my EdgeStar Ice Maker is full?
- D
  Donald EdwardsAug 4, 2025
  If the 'Add Water' light is on in your EdgeStar Ice Maker, even when it's full, the water might lack necessary impurities. Try adding a pinch of salt to introduce minerals that the unit can detect. Also, the water filter might be clogged. Clean it using a brush with plastic bristles at the bottom of the water reservoir.
W
woodwhitneyAug 10, 2025
Why is my EdgeStar IP211SS control panel unresponsive?
- S
  Sarah RichardsAug 10, 2025
  If your EdgeStar Ice Maker's power and ice size indicators are on, but the control panel isn't responding, the unit might be in standby mode. Press the On/Off button until the Power light turns on steadily and stops blinking. If that doesn't work, reset the circuit board by unplugging the unit for an hour, then plug it back in and press the power button. If the control panel still doesn't respond after resetting, it may be faulty, and you should contact EdgeStar support.
I
Ian JamesAug 15, 2025
What to do if my EdgeStar IP211SS is leaking water?
- U
  uvillanuevaAug 15, 2025
  If your EdgeStar Ice Maker is leaking water, ensure the bottom drain plug is firmly attached. If it's missing, contact EdgeStar to purchase a replacement. If the drain plug is correctly attached, an internal hose may have become dislodged or disconnected, in which case you should contact EdgeStar support.
N
Nicholas ElliottAug 19, 2025
Why is my EdgeStar IP211SS not making ice properly?
- A
  Alan HardyAug 19, 2025
  If your EdgeStar Ice Maker produces no ice or very thin ice, the room temperature or water might be too hot. This unit operates best between 50°F and 90°F. If the unit is in a warm area like a sunroom, move it to a cooler location. If the issue persists, contact EdgeStar support as the fan might not be cooling the condenser coils.
C
Collin ThomasAug 25, 2025
Why is my EdgeStar IP211SS making so much noise?
- M
  molly70Aug 26, 2025
  If your EdgeStar Ice Maker is making noise during operation, first ensure the unit is level. If leveling doesn't resolve the noise, consult the “Normal Sounds” section of the owner’s manual to determine if the sounds are typical. A loud knocking or metallic pinging noise might indicate a damaged compressor, in which case you should contact EdgeStar support.

EdgeStar IP211SS Specifications

General

Model Number	IP211SS
Type	Portable Ice Maker
Ice Cube Shape	Bullet
Ice Cube Size	Small, Medium, Large
Control Type	Electronic
Voltage	115V
Frequency	60 Hz
Refrigerant	R134a
Color	Stainless Steel
Ice Storage Capacity	2.5 lbs