EasyManua.ls Logo

EdgeStar PAC8000S - Installing the Carbon Filter; Carbon Filter Installation Steps

EdgeStar PAC8000S
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
Installing the Carbon Filter
Your portable air conditioner ships with a pre-filter and an activated
carbon filter. The carbon filter will help remove contaminates and
odors from the air. It is recommended you replace the carbon filter
every two to three months, or as needed. It is necessary to clean
the pre-filter periodically. Follow the steps below to install the
carbon filter:
1. Shut off the unit if it is on. Pull the front grille forward.
CAUTION: Never operate
the air conditioner without
the pre-filter attached.
2. Place the carbon filter between the grille and the pre-filter.
3. Close the grille.
Carbon Filter
Front Grille
Pre-filter
Pre-filter

Related product manuals