What to do if Edgetech Recording Equipment Serial Port Information has no other dropdown other than Chan 1 or there are errors displayed?
If the Edgetech Recording Equipment's Serial Port Information displays only 'Chan 1' in the dropdown or shows errors, double-check the setup procedure as described in Section 2: MAGETOMETER SETUP.
General| Type | Side scan sonar |
|---|---|
| Interface | Ethernet |
| Operating Frequency | 400/900 kHz |
| Depth Rating | 300 meters |
| Maximum Range | 150 m per side |
| Power Supply | 24-48 VDC |
Explains the manual's objective and scope for the 4125 system.
States EdgeTech's disclaimer for errors and damages from manual use or equipment.
Defines symbols used for warnings, cautions, and notes within the manual.
Details how EdgeTech customers can access software updates and enhancements.
Lists various applications for the 4125 Series Dual-frequency Side Scan Sonar System.
Identifies the primary components of the 4125 Series system.
Describes the function and features of the portable topside processor.
Details the rack mount option for the 4125 system processor.
Describes the 4125 Towfish, its components, and functionality.
Details the specifications and use of the tow cable for the 4125 system.
Lists and describes optional equipment available for the 4125 Series.
Provides detailed specifications for the portable and rack mount topside processors.
Offers a general description of hardware elements for troubleshooting and installation.
Lists detailed specifications for the 4125 Towfish.
Lists outline drawings of the supplied cables for the 4125 system.
Provides instructions for unpacking and inspecting system components.
Details the power requirements for the 4125-P Portable Topside Processor.
Explains how the system interfaces with GPS and navigation systems.
Describes placement requirements for portable and rack mount topside processors.
Details the controls and indicators for both topside processor options.
Explains the connectors for the portable and rack mount topside processors.
Discusses TCP/IP address configuration for the system's network devices.
Guides the user through assembling the tail cone of the 4125 Towfish.
Describes the installation of optional equipment like the Hull Scan Kit.
Details how to connect various system components to the topside processor.
Outlines the steps for activating the system and performing pre-deployment checks.
Describes pre-deployment checks to ensure system operability before use.
Provides guidance on deploying the 4125 Towfish.
Outlines the procedure for recovering the 4125 Towfish.
Explains how to clean the towfish, tow cable, and topside processors.
Details the process of re-arming the towfish after a shear pin snaps.
Instructions for backing up and restoring the system to its factory state.
Guides on how to disassemble and reassemble the towfish for component access.
Explains the procedure for recalibrating the towfish compass if needed.
Provides general guidance for resolving operational or performance issues.
A tabular guide for troubleshooting common issues with the portable topside processor.
A tabular guide for troubleshooting common issues with the 4125 Towfish.
Outlines simple inspections for potential tow cable malfunctions.
Lists part numbers for key components of the 4125-P Portable Topside Processor.
Lists part numbers for major components of the 4125 Towfish.
Presents graphical plots of towing characteristics for various configurations.
To Next Page
