EasyManua.ls Logo

Edgetech 4125 - 5.4 General Troubleshooting

Edgetech 4125
145 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-18 5.0 TROUBLESHOOTING
4125 SIDE SCAN SONAR SYSTEM 0004823_REV_F
5. Verify entry of declination Angle using the command:
getDeclination <CR>
Figure 5-24
5.4 General Troubleshooting
Should some operational or performance problems occur with the 4125 Series Dual-frequency Side Scan
Sonar System, it may be possible to correct them using the troubleshooting guides in the following pages.
For the 4125-P Portable Topside Processor, a tabular troubleshooting guide is provided in TABLE 5-1, and
TABLE 5-2 for the towfish.
These troubleshooting guides identify some symptoms that could occur, and present one or more possible
causes, along with the recommended corrective action for each. Perform the corrective action for any
given symptom in the order of probable causes, which generally corresponds to the degree of
troubleshooting difficulty, from the simple to the more complex.
Before proceeding with any corrective action, verify that the topside processor is plugged into an
appropriate AC or DC power source and that the processor is switched on.

Table of Contents

Other manuals for Edgetech 4125

Related product manuals