EasyManua.ls Logo

Edgetech 4125 - 3.8 Assembling the 4125 Towfish

Edgetech 4125
145 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-8 3.0 SETUP AND ACTIVATION
4125 SIDE SCAN SONAR SYSTEM 0004823_REV_F
P Portable Topside Processor must have its IP address set to 192.9.0.nnn, where nnn is any integer from
1 to 100, except for the following reserved addresses:
192.9.0.225
192.9.0.101
The factory IP address setting of the wired ETHERNET connection for the laptop computer included with
the 4125-P Portable Topside Processor is 192.9.0.99, and for the wireless ETHERNET connection, the
factory setting is 192.9.0.100. For a list of the topside processor ETHERNET devices and their TCP/IP
addresses, along with that of the Towfish CPU, refer to TABLE 3-2.
DEVICE
TCP/IP ADDRESS
Wireless bridge
192.9.0.225
CPU board
192.9.0.101
Table 3-2: ETHERNET Devices TCP/IP Addresses
3.8 Assembling the 4125 Towfish
To assemble the tow 4125 Towfish, first refer FIGURE 3-4 for the tail cone assembly, and then follow the
instructions in the subsections to follow in order to properly connect the rest of the equipment to the
towfish.
Figure 3-4: Tail Assembly Drawing
Tail Cone
Washer
Bolt

Table of Contents

Other manuals for Edgetech 4125

Related product manuals