SEASTAR and BAYSTAR Hydraulic Steering Systems
3-17
The splashwell mount cylinder (part no. HC5380) can be used on all
engines complying with ABYC P17/NMEA/BIA standards provided
they have a threaded attachment hole (3/8" – 24 UNF thread) in
the steering arm. Not suitable for use on engines fitted with factory
power steering.
DESCRIPTION QTY MODEL PART REF.
REQ NUMBER PAGE #
SINGLE ENGINE
(SINGLE CYLINDER)
CYLINDER 1 SPLASHWELL HC5380
HELM 1 * SEASTAR I- STANDARD HH5271 9-6
HOSE KIT 1 OUTBOARD HOSE HO51_ _ 10-2
OIL 3 SEASTAR OIL HA5430 11-1
FOR EXTRA STEERING STATIONS ADD:
HELM 1 * SEASTAR I- STANDARD HH5271 9-6
FITTING KIT 1 ADD A STATION HF5501 10-10
HOSE KIT 1 OUTBOARD HOSE HO51_ _ 10-2
OIL 1 SEASTAR OIL HA5430 11-1
ENGINE/ CYLINDER
CONFIGURATION
DUAL ENGINE
(SINGLE CYLINDER)
CYLINDER 1 SPLASHWELL HC5380
TIE BAR KIT 1 SPLASHWELL
MOUNT TIE BARHO5010
HELM 1 * SEASTAR I- STANDARD HH5271 9-6
HOSE KIT 1 OUTBOARD HOSE HO51_ _ 10-2
OIL 3 SEASTAR OIL HA5430 11-1
FOR EXTRA STEERING STATIONS ADD:
HELM 1 * SEASTAR I- STANDARD HH5271 9-6
FITTING KIT 1 ADD A STATION HF5501 10-10
HOSE KIT 1 OUTBOARD HOSE HO51_ _ 10-2
OIL 1 SEASTAR OIL HA5430 11-1
NON-COUNTER ROTATING APPLICATIONS UP
TO 300 HP MAX
COUNTER ROTATING ENGINE APPLICATIONS
UP TO 600 HP MAX
NUMBER OF TURNS 5.6/6.5
APPLICATIONS UP TO 300 HP MAX
NUMBER OF TURNS 5.5/6.5
OPTIONAL EQUIPMENT
BACK PLATE KIT (FOR STANDARD HELMS) HA5418 9-3
20 DEGREE WEDGE (FOR STANDARD HELMS) HA5419 9-3
AUTOPILOT FITTING KIT (FOR ALL HELMS) HF5501 10-10
* TILT HELM- SEASTAR I HH5741 9-7
REAR MOUNT HELM- SEASTAR I HH5261 9-7
POWER ASSIST STEERING PA1200 2-1
Order Guide
OUTBOARD–SPLASHWELL
MOUNT
To Next Page
Loading...
