To Next Page
J
Jason ButlerAug 2, 2025
What to do if trim tabs on my Edgewater Networks Boat do not work?
- DDonald ThompsonAug 2, 2025
If the trim tabs on your Edgewater Networks Boat are not working together, independently, or intermittently, try the following: * Check the fuse at the fuse panel and replace it if needed. * Ensure all connections at the switch control box are secure. * Confirm the switch assembly has a solid ground. * If the actuator cables were spliced inside the transom, check the joint for a secure connection. If these steps do not resolve the issue, further assistance is needed.
General