To Next PageTo Next Page
Need help?Do you have a question about the EDH FlightScope X1 and is the answer not in the manual?
General| Technology | 3D Doppler radar |
|---|---|
| Battery Life | Up to 8 hours |
| Launch Monitor Type | Portable |
| Measurement Capabilities | Ball speed, launch angle, spin rate, carry distance, total distance, club speed |
| Connectivity | Bluetooth |
| Data Display | Mobile App |
| Data Output | Real-time data |
| Compatibility | iOS, Android |
Lists the hardware and software components included with the FlightScope system.
Instructions for connecting the USB communications cable to the PC and sensor.
Instructions for connecting the AC adapter to the sensor's power port.
Specifies the required distance for placing the sensor behind the tee.
Details the type of surface recommended for sensor placement.
Explains how to operate and use the sensor's handle for positioning.
Guides on adjusting the sensor's tilt and roll angles for optimal performance.
Describes how the FlightScope system powers on when connected.
Explains how to safely turn off the FlightScope system.
Outlines the process for setting up the FlightScope system using the wizard.
Details the initial connection setup via USB cable.
Guides on setting detection mode, units, and distances for geometry.
Explains how to adjust the sensor's tilt, roll, and pointing direction.
Describes how to point the sensor and test ball origin for accuracy.
Instructions for setting the altitude for ball flight calculation.
Guides on selecting units for data display (Metric or Imperial).
Explains how FlightScope measures spin rate directly.
Details the procedure for marking balls for indoor spin measurements.
Provides guidelines for using unmarked or marked balls for spin measurement.
Describes the different sensor status indicators and their meanings.
Explains how to view detailed descriptions of status indicators.
Shows how to set club type and view sensor tilt/roll angles.
