Need help?Do you have a question about the EDI SSM-12LEC and is the answer not in the manual?
General| Brand | EDI |
|---|---|
| Model | SSM-12LEC |
| Category | Measuring Instruments |
| Language | English |
Details the SSM-LE series signal monitors, their capabilities, and NEMA standards compliance.
Detects and responds to conflicting signal inputs.
Monitors for absence of voltage on all channel signal inputs.
Details how the unit detects and responds to AC line power failures.
Monitors FYA movements using four-input channels for traffic signal safety.
Accesses and displays status, event logs, and configuration data via ECcom software.
Sets permissive or compatible channel configurations using wire jumpers on the Program Card.
Details power requirements, AC/DC voltage monitoring thresholds, and logic input levels.
Lists fault response times, interval durations, and delays for various functions.
Details pin terminations for MS-A and MS-B connectors on the SSM-12LE model.
Details pin terminations for MS-A connector on the SSM-6LE model.
Describes the EIA-232 connector and its pin functions.
To Next Page
