Need help?Do you have a question about the EDI SmartMonitor MMU-16LE Series and is the answer not in the manual?
General| Communication Interface | Ethernet, Wi-Fi, Bluetooth, Serial, USB |
|---|---|
| Ethernet | 10/100/1000 Mbps |
| Wi-Fi | 802.11 a/b/g/n |
| Bluetooth | Bluetooth 4.0 |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10% to 90% non-condensing |
Detailed description of the MMU-16LE SmartMonitor unit.
Overview of the MMU-16LE's advanced functions and displays.
Description of physical inputs for field signals.
Monitors conflicting signals and absence of voltage on inputs.
Monitors cabinet and supply voltages for proper operation.
Details power failure detection and internal self-check diagnostics.
Details hardware capabilities and general features.
Covers Dual Indication, Recurrent Pulse, and Field Check monitoring.
Wizard for fault diagnosis and FYA/PPLT5 monitoring modes.
Describes various logs and data available via ECcom software.
Methods for setting monitor configuration parameters via ECcom.
Describes the primary display and initial menu navigation.
Details on accessing logs, configuration, and wizards.
How to program using soldered wire jumpers on the Program Card.
Configuring advanced monitoring features through menu or ECcom.
Step-by-step process for configuring enhanced features.
Explains the main status, channel status displays, and LED indicators.
Details the operation of navigation and control buttons.
Covers power requirements, voltage monitoring, and logic inputs.
Physical dimensions and operating conditions.
Specifies timing parameters for various fault detection conditions.
Defines timing for power failure response and recovery.
Details pinouts for Type 16, Type 12, and rack mount connectors.
Wiring for programming card and communication ports.
To Next Page
