3. Attach satellite speaker to the screw in the wall
Place Satellite Speaker onto the Wall
Align the hole on the rear panel of the satellite speaker to the screw on the wall and fix securely.
Note:
1. The included screws are only suitable for walls of concrete and brick structure, not for walls with gypsum board,
foam composite board and wood structure. Please consult a professional to ensure safety if you need to install
in gypsum board and wooden structure walls.
2. Self-tapping screw and plastic wall anchor are not included in the package, and you may need to buy them.
Warning:
1. Please follow installation instructions to avoid damage to your product.
2. Please make sure the mounting height is lower than 2m.
English
To Next Page
Loading...
