Using the remote control, press “time” key once, the screen will display the current time.
Press & hold “time” key approximately 2 seconds, the hour number will blink, press “adj+/adj-” or to adjust
hour;
press “time” key again, the minute number will blink, press “adj+/adj-” or to adjust minute. The time will be
saved after approximately 2 seconds.
Note: The time is 12-hour time format, and it will switch between AM and PM when adjusting time.
Page 14 Operational guide
Press “alarm” key once, the screen will display the alarm setting.
Press and hold “alarm” key to access to alarm setting.
Press “alarm” key to select “alarm number – alarm on/off – alarm time – alarm source – alarm volume”.
Press to adjust settings.
Note: There are 5 available alarm settings available.
Available alarm source: FM, microSD
Alarm volume: 10~30
Page 15 Operational guide
Alarm snooze / disable
Alarm functions:
● When alarm sound is activated, touch any key on the top of the speaker, to snooze the alarm for 10 minutes.
To Next Page
Loading...
Need help?
General
