EDIFIER W310BT - Bluetooth Connection; Connect to Two Bluetooth Devices Simultaneously

● Bluetooth Connection
• When powered off, press and hold the multi-function button for
approx. 5 seconds until the red and blue light flashes alternately,
then the headphones enter pairing state.
• Set mobile phone to search and connect to “EDIFIER W310BT”, after
pairing is successful, the blue light will flash slowly.
● Connect to Two Bluetooth Devices Simultaneously
• Pair the headphones with the first device;
• Restart the headphones; press and hold the multi-function button for
5 seconds to enter pairing state and pair with the second device;
• Operate the first device to pair with the headphones again, then they
are successfully connected to two devices simultaneously.