EdilKamin SLIDE User Manual

10
ENGLISH
INSTALLATION
1.
1.
Fit four screws (V) on the back of the upper top(1) provided with the package, without tightening.
Fit four screws (V) on the back of the upper top(1) provided with the package, without tightening.
2.
2.
Slide the bottom top (2),
Slide the bottom top (2),
3.
3.
Place the upper top (1). FIt the screws in the slots as in detail. Then, fi x the four screws (V) as in point 1.
Place the upper top (1). FIt the screws in the slots as in detail. Then, fi x the four screws (V) as in point 1.
4.
4.
The result is shown in Figure 4
The result is shown in Figure 4
SLIDE - STEEL TOP
SLIDE - STEEL TOP
2
1
1
2
2
3
3
4
4
1
1
2
V
V
V
V
Detail of the
Detail of the
screw in the slot
screw in the slot
Position the top, after having inserted the 5 rubber
dampers, by slotting it into the two pins (arrows)
SLIDE - STONE/MARBRE TOP
SLIDE - STONE/MARBRE TOP
Unscrew the pins (P) fi xed with the nut.
Unscrew the pins (P) fi xed with the nut.
Pins and nuts are no more useful
Pins and nuts are no more useful
Position the top, after having inserted the 5 rubber
Position the top, after having inserted the 5 rubber
dampers.
dampers.
SLIDE - GLASS TOP
SLIDE - GLASS TOP
P
P

EdilKamin SLIDE Specifications

General

Type	Pellet Stove
Efficiency (min)	90%
Tank capacity	15 kg
Diameter of smoke outlet	80 mm
Heating power (max)	9 kW