What to do if my EdilKamin SLIDE Stove displays an ignition timeout error?
If your EdilKamin Stove displays an error indicating an unsuccessful ignition, and there is no flame present, ensure the grate is properly seated and clean. Also, check that there are pellets in the tank and grate. You might try using a bit of solid paraffin to ignite the stove, but contact a technician first. If a flame is present, contact a technician.
How to fix EdilKamin Stove displaying low combustion air intake?
If your EdilKamin Stove displays a message indicating that the combustion air intake is below the set level, make sure that the hearth door is closed and that the stove, exhaust, and combustion air duct are clean.
Why does my EdilKamin Stove shut down due to exceeding maximum fumes temperature?
If your EdilKamin Stove shuts down because it's exceeding the maximum fumes temperature, check the type of pellet you are using. If you are in doubt, contact a technician.
What to do if EdilKamin SLIDE Stove displays low fume temperature?
If your EdilKamin Stove displays a message indicating a low fume temperature (lower than the set value), first, check that there are pellets in the tank. If the issue persists, contact a technician.
General| Type | Pellet Stove |
|---|---|
| Efficiency (min) | 90% |
| Tank capacity | 15 kg |
| Diameter of smoke outlet | 80 mm |
| Heating power (max) | 9 kW |
To Next Page
