USER CONTROLS (REMOTE CONTROL)
- ON/OFF
- Switch-on/switch-off
- Manual mode setting
• Power setting
• Fan setting
- Automatic mode setting
• Temperature setpoint setting
• Fan setting
- RELAX function
- From the Menu page:
• Stand By
• Crono
• Night
• Load Pellets
• Language
• Date / time
• Display
• Info (technician only)
• Technical menu (technician only)
We describe the procedures below.
.
ON/OFF
Hold the ON/OFF button down to turn the stove ON.
When ON, the stove has a flame (ignition phase, etc.)
when there is a heating demand.
Switch-on/switch-off
The ON/OFF button switches the stove on (starts
the ignition phase) or off (starts the swithc off phase)
manually in Manual mode only.
In Automatic mode, the stove responds to the heating
demand.
Setting Manual/Automatic
Hold down the OK button to switch from manual to
automatic or vice versa.
In Manual mode, the display reads “Man”.
In Automatic mode, the temperature displays.
In automatic:
Room temperature setting
Set the temperature setpoint (Set) with the “+” and “-“
buttons.
Ventilation setting
Press “OK” once
The fan setting displays, next to the blade symbol
representing the fan.
Set the fan level with the “+” and “-“ buttons.
The blades fill in to indicate the current setting.
- In manual:
Power setting
Set the power level (displayed by the flame symbol)
with the “+” and “-“ buttons.
The power level displays next to the flame symbol.
Ventilation setting
Press “OK” once
The fan setting displays, next to the blade symbol
representing the fan.
Set the fan level with the “+” and “-“ buttons.
The blades fill in to indicate the current setting.
THE NUMBER NEXT TO THE FAN BLADE OR FLAME
ONLY DISPLAYS WHILE THE SETTING IS BEING
MADE.
USER INSTRUCTIONS