INSTALLATION
PREPARATION AND UNPACKING
The packaging materials are neither toxic nor noxious
and do not require special disposal.
The user is responsible for storing, disposing or and
recycling them in a regulatory fashion.
PACKAGING
• The packaging contains two items:
• one containing the structure of the stove (1) with
the side panels already installed, and a bag with
five rubber dampers for the top
• one containing the marble or stone top (2)
The stove itself contains:
the remote control, the warranty certificate, the glove,
this manual and the desiccating salts.
The lever for opening the door is also on the pallet.
Always move the stove vertically with
suitable equipment and in observance of
safety regulations.
Do not turn the package over, and handle
all parts requiring installation with care.
1
2
INSTALLING THE LINING
Proceed as follows (refer to the figures):
• To remove the stove from the pallet: remove the
screws and rear bracket; take the side panels off
to remove the front screws.
• Fit the interlocking side panels and screw down
the bolts on the back
• Position the top
PLEASE NOTE:
DO NOT ATTEMPT TO TAKE THE STOVE
OFF THE PALLET WITHOUT FIRST
REMOVING THE SIDE PANELS AND THE
SCREWS (ONE PER SIDE) ANCHORING
THE STOVE TO THE PALLET
To Next Page
Loading...
Need help?
General
