USER INSTRUCTIONS
- Night
This function shuts the appliance down after a given
number of hours of activation of the function itself.
This is convenient if you go to bed and want the stove
to shut off after a few hours.
Activating the Night function
Press “OK” to enter the function from the Menu.
Use the “+/-” buttons to activate/deactivate the
function.
Press “M” to quit without saving.
Confirm with the “OK” button.
Setting the hours
Press “+” to increase the duration.
Press “M” to quit without saving.
Confirm with the “OK” button.
Press the ON/OFF button to return to the main page.
With the Crono function active, the display shows the
moon and the time remaining to shutdown at the top
left.
To quit the function, return to the menu and set the
Night function to deactivated. The procedure is the
same as for activation.
Load Pellets
Loads pellets, for example when the screw feeder is
empty.
Used by the technician during commissioning.
Available only in the OFF state. If you attempt to activate
the function in other states, access is not granted.
Press “OK” to enter the function from the Menu.
Use the “+/-” buttons to activate/deactivate the
function.
Press “M” to quit without saving.
Confirm with the “OK” button.
Language
Selects the language.
This displays the first time the remote is activated with
the stove powered on, or by selecting the option in the
menu.
Press “OK” to enter the function from the Menu.
Use the “+/-” buttons to select the language.
Press “M” to quit without saving.
Confirm with the “OK” button.
To Next Page
Loading...
Need help?
General
