17
ENGLISH
USER INSTRUCTIONS
fi g. 1
fi g. 2 fi g. 3
The display reads the POSSIBLE STATES
described below:
- OFF STATE
The product is “deactivated” and will not produce heat
due to manual switching off using the ON/OFF button
on the remote control or due to an external contact
(crono, phone dialler)
The display shows the current time, room temperature
and the status in relation to which the stove is OFF.
The stove is OFF :
in response manual intervention (fi g. 1)
due to power failure (fi g. 2)
shut off by Crono mode (fi g. 3)
From the OFF page, press the ON/OFF button for 3
seconds to go to the ON page.
Pressing the +/- keys has no effect.
Pressing the M key displays the menu.
- ON STATE
The product is “active” and can produce heat.
The display shows (fi gure 4)
1. the current time
2. the current room temperature
3. the room temperature setting or manual mode
4. the power level (represented by the fl ames)
5. the fan level (represented by the fi lling in of the
blades)
If timer programming is active, 3 and 4 are replaced by
the day’s timer programming with the current setpoint
at the centre (fi gure 5) and the temperature displayed
at the top right.
- ALARM STATE
In case of shutdown due to alarm, 4 is replaced by a
message indicating the type of shutdown (fi gure 6)
- STAND BY STATE
Situation in which there is no demand for heating.
If the Stand By function is active, the display shows the
same information as in the ON state, without fl ame in
the upper left displayed “STB”.
fi g. 4
fi g. 5
H1
fi g. 6
When It Is On, The Stove Does Not
Always Have A Flame. The Stove Turns
On In Response To The Heating Demand
Setting.
To Next Page
Loading...
Need help?
General
