22
ENGLISH
USER INSTRUCTIONS
The second screen (accessible by pressing the “OK”
button from the fi rst screen) allows you to set the start
and end time of the time period matching the chosen
temperature setpoint (T1,T2 and T3).
The set temperature is shown in the middle of the
clock.
This is done in steps of 30’. The periods that the
appliance is ON are shown with the dots of the
numbers in black. The periods shown with the dots of
the numbers in white, the appliance is OFF.
The setting screen is the following.
7 DAYS
FROM 06:00
TO 08:00
TEMP T1
Press the “+/-” buttons to change the switch-on time.
Hold the button down to scroll through the times more
quickly.
Press the “OK” button to confi rm and go to the end
time setting.
Press the “+/-” buttons to change the switch-off time.
Hold the button down to scroll through the times more
quickly.
Press the “OK” button to confi rm and go to the
temperature selection (T1, T2 or T3).
Press the “+/-” buttons to switch between the
temperatures.
To continue with other changes, press the “OK”
button.
To choose between exit without saving and save,
press the “M” button.
The following screen will appear.
Press “M” to exit
without saving
Press “OK” to
save and go back
to the screen
To view/change the settings (“CHANGE” on
the display), from the Crono function, press the “OK”
button. The following screen will appear.
Scroll to “CHANGE” (underlined) using the “+/-”
buttons.
Press the “OK” button to confi rm and select
“CHANGE”.
To go back to the previous screen press the “M” button.
7 DAYS
5 DAYS
WEEKEND
DAY
RESET
“+/-” scroll
buttons
“OK” button to
confi rm
From the “CHANGE” function, in addition to changing/
viewing the “7 DAYS”, “5 DAYS”, “WEEKEND”, “DAY”
programming, you can erase all time settings
using the “RESET” function.
RESET
Use the “+/-” buttons to switch between YES and NO
“OK” button to continue with other changes
CHANGE
DELETE ALL TIME
PERIODS?
NO
YES
19
SAVE
CHANGES?
7 DAYS
To Next Page
Loading...
Need help?
General
