EasyManuals Logo

EdilKamin SLIDE User Manual

EdilKamin SLIDE
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
21
ENGLISH
To set the temperature setpoints (“TEMP” on
the display), from the Crono function, press the “OK”
button. The following screen will appear.
Scroll to “TEMP” (underlined) using the “+/-” buttons.
Press the “OK” button to con rm and select “TEMP”.
Press the “M” button to go back to the previous screen.
press the “OK” button to enter the “TEMP” function.
USER INSTRUCTIONS
To continue with other changes, press the “OK”
button.
To choose between exit without saving and save,
press the “M” button.
The following screen will appear.
“+/-” buttons to
set the desired
temperature
“OK” button to
scroll (switch
to the next
temperature)
Press “M” to exit
without saving
Press “OK” to
save and go back
to the screen
To combine one of the three temperatures
to a time period (“SET” on the display), from the
Crono function, press the “OK” button. The following
screen will appear.
Scroll to “SET” (underlined) using the “+/-” buttons.
Press the “OK” button to con rm and select “SET”.
Press the “M” button to go back to the previous screen.
press the “OK” button to enter the “SET” function.
ENABLE
TEMP
CHANGE
SET
“+/-” scroll
buttons
“OK” button to
con rm
The rst page (below) allows you to choose whether to
apply the same Crono con guration for 7/7 days, 5/7,
weekend only or day by day.
The Crono has three adjustable setpoints: T1, T2 and
T3 (screens below).
Press the “OK” button to switch between the setpoints.
Use the “+” and “-” buttons to set the desired
temperature setpoint for each level.
T1 must always be lower than T2 and T2 lower than T3:
if you try to set a T1 temperature that is higher than T2,
the T1 temperature will automatically match T2.
ENABLE
TEMP
CHANGE
SET
“+/-” scroll
buttons
“OK” button to
con rm
SET
“+/-” scroll
buttons
“OK” button to
con rm
TEMP
SAVE
CHANGES?
TEMP
7 DAYS
5 DAYS
WEEKEND
DAY
MENU
MENU
NOTE
Press the O/I key to switch on/off the product, outside
setted time periods, when Crono mode is enabled.
Crono mode will be disabled.
See instructions on the Crono section to restore the
Crono mode.

Other manuals for EdilKamin SLIDE

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EdilKamin SLIDE and is the answer not in the manual?

EdilKamin SLIDE Specifications

General IconGeneral
TypePellet Stove
Efficiency (min)90%
Tank capacity15 kg
Diameter of smoke outlet80 mm
Heating power (max)9 kW

Related product manuals