Chapter 1
Quick Setup
The Quick Setup section is designed to get you using the broadband router as quick as possible. In the Quick Setup you
are required to fill in only the information necessary to access the Internet. Once you click on the Quick Setup Wizard in
the HOME page, you should see the screen below.
Step 1) Time Zone
The Time Zone allows your router to base its time on the settings configured here, this will affect functions such as Log
entries and Firewall settings.
Parameter Description
Set Time Zone
Select the time zone of the country you are currently in. The router will set its time
based on your selection.
Time Server Address
You can manually assign time server address if the default time server dose not
work.
Enable Daylight Savings
The router can also take Daylight savings into account. If you wish to use this
function, you must check/tick the enable box to enable your daylight saving
configuration (below).
Start Daylight Savings Time
Select the period in which you wish to start daylight Savings Time
End Daylight Savings Time
Select the period in which you wish to end daylight Savings Time
Click on NEXT to proceed to the next page (step 2) Broadband Type.
13
To Next Page
Loading...
Need help?
General
