2c) Windows 2000
1: Click the Start button and select Settings, then click Control Panel. The Control Panel window will
appear.
2: Double-click Network and Dial-up Connections icon. In the Network and Dial-up Connection window,
double-click Local Area Connection icon. The Local Area Connection window will appear.
3: In the Local Area Connection window, click the Properties button.
4: Check your list of Network Components. You should see Internet Protocol [TCP/IP] on your list. Select
it and click the Properties button.
5: In the Internet Protocol (TCP/IP) Properties window, select Obtain an IP address automatically and
Obtain DNS server address automatically as shown on the following screen.
6: Click OK to confirm the setting. Your PC will now obtain an IP address automatically
from your Broadband Router’s DHCP server.
Note: Please make sure that the Broadband router’s DHCP server is the only DHCP server
available on your LAN.
Once you’ve configured your PC to obtain an IP address automatically, please proceed to Step 3.
9
To Next Page
Loading...
Need help?
General
