EasyManuals Logo

Edimax BR-6228nC Datasheet

Edimax BR-6228nC
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
150Mbps Wireless 802.11b/g/n
Broadband Router
* The EZMax Setup CD Wizard only supports Edimax wireless routers.
Wireless Green Technology
Edimax BR-6228nC implemented the latest wireless green technology which could save energy by detecting the
usage of wireless transference. It could supply the right amount of power to reach each connected wireless
device when they are performing data transmission and save up to 74% of the power consumption. When in full
loading, BR-6228nC could also save 50% power consumption than non-green solution routers.
Impressive Data Transmission Rate via IEEE802.11n
Edimax BR-6228nC is a high speed solution that complies with wireless IEEE 802.11b/g, and is compatible with
IEEE 802.11n standard. When fine-tuned to operate using the wireless 802.11n technology, BR-6228nC wireless
data transmission rate can reach up to 150Mbps a coverage better than a standard 802.11g/b router. BR-
6228nC is truly a high performance and cost-effective solution for your home and small business environments.
Extensive Internet Connection Sharing
With the built in NAT (Network Address Translation) function , the Edimax BR-6228nC allows up to 253 wired or
wireless clients to simultaneously share an Internet connection.
Flexible WISP ( Wireless Internet Service Provider) Connection Mode
Wireless connection from your broadband router to an ISP’s Access Point is also possible. When the BR-6228nC
is assigned to perform such task, it repeats the signal from a wireless Internet Service Provider to your home or
office, simultaneously allowing connection of both wired and wireless stations to the Internet.
Easy & Multilingual Setup Installation CD*
A unique multilingual Setup Wizard is provided in the installation CD. By simply following the animated
installation procedures, connection of your router to the Internet is done within minutes!
WPS (Wi-Fi Protected Setup) Button
Edimax BR-6228nC supports you to build the connection between wireless network client and the router by
simply pressing the WPS button on the wireless client and the router. No need to set up and configure the
security on a wireless network.
Maximum performance, actual data rates and coverage may vary depending on network conditions and environmental factors. Stated ranges are based on
independent test results and are not guaranteed. Product specifications and design are subject to change without notice. Copyright © 2012 Edimax
Technology Co. Ltd. All rights reserved.
www.edimax.com
BR-6228nC

Other manuals for Edimax BR-6228nC

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Edimax BR-6228nC and is the answer not in the manual?

Edimax BR-6228nC Specifications

General IconGeneral
VPN supportIPSec/PPT
Ethernet LANYes
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Supported network protocolsPPPoE/Static IP/PPTP/Dynamic IP/ L2TP
Antennas quantity1
Antenna gain level (max)3 dBi
Ethernet LAN (RJ-45) ports4
NAT functionalityNAT/NAPT IP
Security algorithms128-bit WEP, 64-bit WEP, WPA-PSK, WPA2-PSK
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 4 (802.11n)
WLAN data transfer rate (max)150 Mbit/s
Bandwidth2.4 GHz
Input current1 A
Input voltage5 V
Rack mountingNo
Filtering descriptionURL
Flash memory4 MB
CertificationCE, FCC
Internal memory16 MB
Operating temperature (T-T)0 - 45 °C
Operating relative humidity (H-H)10 - 90 %
Product colorWhite
LED indicatorsLAN, Link, Power, WAN, WLAN
Cables includedLAN (RJ-45)
Weight and Dimensions IconWeight and Dimensions
Depth110 mm
Width134 mm
Height26 mm
Weight- g

Related product manuals