What to do if my Edimax Wireless Router file transfers are slow?
If your file transfers are slow or frequently interrupted, try moving closer to the wireless access point. You can also try again later, as your local network may be experiencing technical difficulties or very high usage. Additionally, changing the channel number may resolve the issue.
What to do if I can’t log onto the browser-based configuration interface of Edimax BR-6258nL?
If you can’t log onto the browser-based configuration interface and the access point is not responding, ensure the travel router is powered on by checking the LED and USB connection. Make sure your wireless device connects to this travel router wirelessly and that you are using the correct IP address.
What to do if I can’t log onto the browser-based configuration interface of Edimax Wireless Router because of incorrect password?
If you can’t log onto the browser-based configuration interface due to an incorrect password, remember that the password is case-sensitive, so ensure the “Caps Lock” light is not illuminated. If you do not know your password, restore the device to factory settings.
What to do if my Edimax Wireless Router can’t establish a connection with a particular wireless access point?
If your travel router can’t establish a connection with a particular wireless access point, try clicking “Connect” several more times. Ensure that you input the correct passphrase or security key if connecting to an access point with encryption. It is also possible that the access point only allows network cards with specific MAC addresses; in this case, request that the owner/administrator of the access point add your MAC address to the list.
What to do if my Edimax BR-6258nL Wireless Router can’t locate the travel router with my wireless client?
If you can’t locate the travel router with your wireless client, check if “Broadcast ESSID” is “Enabled” or “Disabled”. If “Disabled,” you need to input the ESSID into your wireless client manually. Also, try moving closer to the travel router.
Why my Edimax BR-6258nL travel router can’t locate a wireless access point?
If your travel router can’t locate a wireless access point when using the “Site Survey” function, try clicking “Rescan” several more times. Adjust the position of the travel router, or move closer to a known wireless access point. If the SSID of the access point you wish to connect to is hidden (nothing displayed in the “SSID” field in the “Site Survey” function), then you need to input the SSID manually, ensuring that you input the correct SSID.
Why Edimax BR-6258nL doesn't automatically redirect to the browser based configuration interface?
If your web browser doesn’t automatically redirect to the browser-based configuration interface, ensure that the router is powered on correctly. If you recently rebooted the device, remember that the router will be unresponsive for up to 1.5 minutes after a reboot. Try the following URLs: http://edimax.go, http://edimax.setup, or http://192.168.8.1. Remember to include http:// in the URL. Ensure that your wireless client is connected to the travel router’s SSID. Try using an alternative web browser.
Is it normal if the Edimax BR-6258nL Wireless Router travel router is extremely hot?
It is normal for the travel router to heat up during frequent use. If you can safely place your hand on the travel router, the temperature of the device is at a normal level. If you smell burning or see smoke coming from travel router or A/C power adapter, then disconnect the travel router and A/C power adapter immediately, as far as it is safely possible to do so. Call your dealer of purchase for help.
Why I can’t save connection information to the “Access Keeper” of Edimax BR-6258nL?
Connection information will only be saved to the “Access Keeper” when using iQ Setup. Manual configurations made using the browser based configuration interface will not be saved in the “Access Keeper”.
Why “Access Keeper” has deleted my connection information on Edimax BR-6258nL Wireless Router?
“Access Keeper” can only store 10 sets of connection information. When 10 sets have been saved, any additional connections will replace the 1st, and then the 2nd (and so on) stored sets of information. If you wish to keep a particular set of settings, please delete any other stored sets of information which are not used frequently, so that the “Access Keeper” has enough available space to save new connections.
Output Power & Sensitivity Gain| output power 11n | 14±1.5dBm |
|---|---|
| output power 11g | 14±1.5dBm |
| output power 11b | 17±1.5dBm |
Operating Environment| operating humidity | 10-90% (Non-condensing) |
|---|---|
| operating temperature | 0-45oC |
| dimensions | 65 (W) x 15.25 (D) x 21.25 (H) mm |
To Next Page
