Edimax BR-6428nS V2 Brochure & Specs

Wi-Fi Protected Setup (WPS) Button
The BR-6428nS V2 has a one-click Wi-Fi Protected
Setup (WPS) button to help you set up and activate a
secure wireless network in a snap.
Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors. Product specifications and design are subject to change without notice.
Copyright © 2013 Edimax Technology Co. Ltd. All rights reserved.
www.edimax.com
www.edimax.com
BR-6428nS V2
TECHNICAL SPECIFICATIONS
N300 Multi-Function Wi-Fi Router
Three Essential Networking Tools in One
FUNCTIONS HARDWARE INTERFACE MANAGEMENT
Supports router, access point &
range extender modes
Port triggering for special
applications
DDNS and SIP
Guest network
Virtual server and DMZ hosting
MAC/IP filter and URL blocking
Static routing
UPnP architecture
VPN pass-through (IPSec/PPTP)
Wi-Fi schedule control
1 x RJ-45 Fast Ethernet WAN
port
4 x RJ-45 Fast Ethernet LAN
ports
LED Indicators: power, wireless,
WAN, LNK/ACT for LAN
2 x 5dBi fixed antennas
WPS/Reset button
Intuitive user interface
System status and security log
(web interface)
Firmware upgradeable
WAN SECURITY
OUTPUT POWER & RECEIVE
SENSITIVITY
Supports WISP connection mode
Supports RJ-45 cable/xDSL modem
WAN protocol: PPPoE, static IP,
dynamic IP, PPTP, L2TP
NAT/NAPT IP sharing
WEP, WPA & WPA2 encryption
DHCP server/client
QoS for critical operations
SPI anti-DoS firewall
E.I.R.P: < 20dBm
11b (11Mbps) : -83dBm±2dBm,
11g (54Mbps) : -71dBm±2dBm,
11n (20MHz) : -68dBm±2dBm,
11n (40MHz) : -64dBm±2dBm
MEMORY INSTALLATION KIT HUMIDITY & TEMPERATURE
4MB NOR Flash
16MB SDRAM
Smart iQ Setup, no CD required
Supports smartphone, tablet or
laptop setup. (iOS 4 or Android 4
and above are required for
smartphone or tablet setup.)
10 – 90% (Non-condensing)
0 – 40
o
C
POWER ADAPTER DIMENSIONS & WEIGHT CERTIFICATIONS
5V DC, 1A 135(W) x 110 (D) x 28 (H) mm
161g (antenna weight included)
CE, FCC

Edimax BR-6428nS V2 Specifications

General

VPN support	PPPoE, static IP, dynamic IP, PPTP and L2TP
Ethernet LAN	Yes
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Wi-Fi band	No
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Ethernet LAN (RJ-45) ports	4
Antennas quantity	2
Antenna gain level (max)	5 dBi
Security algorithms	WEP, WPA, WPA2
Input current	1 A
Rack mounting	-
WLAN data transfer rates supported	300 Mbit/s
Product color	White
LED indicators	Activity, LAN, Link, Power, WAN
Flash memory	4 MB
Certification	CE, FCC
Internal memory	16 MB
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Cables included	LAN (RJ-45)
Output voltage	5 V

Weight and Dimensions

Depth	110 mm
Width	135 mm
Height	28 mm
Weight	161 g