Figure B-6: TCP/IP Properties (Win 2000)
5. Ensure your TCP/IP settings are correct:
Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is the default
Windows settings.
Restart your PC to ensure it obtains an IP Address from The Load Balancer.
Using a fixed IP Address ("Use the following IP Address")
If your PC is already configured, check with your network administrator before making the following
changes:
• Enter The Load Balancer's IP address in the Default gateway field and click OK. (Your LAN
administrator can advise you of the IP Address they assigned to The Load Balancer.)
• If the DNS Server fields are empty, select Use the following DNS server addresses, and enter the
DNS address or addresses provided by your ISP, then click OK.
Page 76
To Next Page
Loading...
