3
2 Installation Procedure
Before you proceed with the installation, please notice following descriptions.
Note1: The following installation was operated under Windows XP.
(Procedures are similar for Windows Vista/7.)
Note2: If you have installed the Wireless PC Adapter driver & utility before,
please uninstall the old version first.
Hardware Installation
EW-7722UTn V2
1. Link/Activity LED (Under the case)
2. WPS Button
No wireless network card is installed.
Solid light 5 seconds means WPS connection is
established successfully.
Wireless network card is normally installed
/Linked to a wireless access point .
Transferring or receiving data.
Fast Blinking three times per second means
WPS is activated. The network card will wait for 2
minutes to establish WPS connection.
To Next Page
Loading...
Need help?
General
