26
2. PBC (Push Button Configuration) WPS
The EW-7722UTn V3 PBC WPS can be executed from this page by following
the steps below or by push the physical WPS button to connect the Wi-Fi
through the VI-4. WPS Setup instruction:
i. Press the WPS button on your wireless router/access point for the
correct length of time to activate its WPS.
Please check the instructions for your wireless device for
how long you need to hold down its WPS button to activate
WPS.
ii. Click the “PBC” button in the “WPS” page. Within two minutes,
the wireless adapter will establish a connection with your
wireless router/access point.
To Next Page
Loading...
Need help?
General
