Edimax EW-7722UTn V3 User Manual

27
WPS button
VI-5. WPS Setup
If your wireless router/access point supports Wi-Fi Protected Setup (WPS)
then you can use this method to connect to a Wi-Fi network.
1. Press the WPS button (often the WPS/Reset button) on your router/access
point to activate WPS.
Please check the instructions for your wireless router/access point for
how long you need to hold down its WPS button to activate WPS.
2. Within two minutes, press the WPS button on
the EW-7722UTn V3 to activate its WPS.
3. The devices will establish a connection.

Edimax EW-7722UTn V3 Specifications

General

Brand	Edimax
Model	EW-7722UTn V3
Category	Adapter
Language	English