25
VII. Using The Adapter
After you have installed the driver and if necessary disabled other wireless
adapters (see VI. Disabling Network Adapters), Windows users can connect
to a Wi-Fi network as usual (see below). Mac users need to connect to a Wi-Fi
network using the included utility software, as described in VI-5. Mac.
VII-1. Windows
Below is an example of how to connect using Windows Vista - the process
may vary slightly for other versions of Windows.
1. Click the network icon (examples below) in the system tray and select
“Connect to a network”.
2. Search for the SSID of your Wi-Fi network and then click “Connect”. If you
set a password for your network, you will then be prompted to enter it.
3. After correctly entering your password, you will be successfully connected
to your Wi-Fi network.
To Next Page
Loading...
Need help?
General