z Install administrator’s utilities into his/her
computer.
z Configure PrintSir from administrator’s
configuration utility.
2. Client Installation and Configuration (refer to
section 3 for more detailed information).
Client users must install Windows PTPP driver
(Peer-to-Peer Printing) for network printing.
In addition, after PTPP is installed, the system
will automatically search for all print servers on the
network, and add all printing ports (P1/P2/P3) of
the print servers into Windows’ printing port (refer
to Network Printing Architecture in section 1.4 for
more detailed information).
19
To Next Page
Loading...
