3.4 Client Installation and Setup
The Client Installation can be performed on Windows
95/98/Me/NT/2000 with the same user interface. Before the
installation procedure, please confirm that your PC has
connected to the network and installed at least one network
protocol.
1. Insert the CD shipped along with the print server into
your CD-ROM drive. The Autorun.exe program should
be executed automatically by Windows. If not, run
Autorun.exe manually from CD-ROM drive’s root
directory.
2. The "Installation Manager" will be displayed on the
screen as following.
3. Click “Client Installation”, and the “Utilities Setup”
window will be displayed.
30
To Next Page
Loading...
