After searching is completed, the screen will be
switched to the following:
The Window will be split into two parts:
z PrintSir List on the left portion, which lists
all PrintSirs found on the same network.
z Web Pages for the selected PrintSir on the
right portion, which displays the
configuration information for the PrintSir.
In the left frame, click on the PrintSir that you
want to manage and configure, then the PrintSir’s Web
configuration screen will be displayed in the right
frame. Instead of executing WebDESK Utility, you may
also directly enter PrintSir’s IP address into the address
field of any browser to display its Web management
screen. The only difference is that the list in the left
frame will not be displayed.
8.3 Web Management of PrintSir
95
To Next Page
Loading...
