Edimax PS-3103P - 7 Configuration Utility; Introduction

7. Configuration Utility
7.1 Introduction
This chapter introduces PrintSir’s system
configuration utility in Windows environment. This utility
is automatically installed during Windows Administrator
Utility installation procedure - refer to section 3.2 and 3.3
(see below).
This utility provides the most complete management
and configuration functions on the PrintSir server side.
This utility only provides configuration functions for
PrintSir itself; it does not include configuration functions
for client side or other file server or NetWare server in the
network environment.
The Configuration Utility provides the following
configuration and management functions:
 General : General Information of PrintSir
 PrintSir Status : PrintSir Network Status
 Printer Status : Attached Printer Status
 IP Cfg : IP Address Configuration
79