IV-5-4. Factory Default
If the access point malfunctions or is not
responding, then it is recommended that you
reboot the device (see IV-5.5) or reset the device back to its factory default
settings. You can reset the access point back to its default settings using this
feature if the location of the access point is not convenient to access the reset
button.
Click “Factory Default” to restore settings to the
factory default. A pop-up window will appear and
After resetting to factory defaults, please wait for the access
point to reset and restart.
IV-5-5. Reboot
If the access point malfunctions or is not
responding, then it is recommended that
you reboot the device or reset the access point back to its factory default
settings (see IV-5-4). You can reboot the access point remotely using this
feature.
Click “Reboot” to reboot the device. A countdown
will indicate the progress of the reboot.
To Next Page
Loading...
