Backup on USB/HDD
Standard: This menu is only accessible if a suitable USB data storage is connected and recognised by the
receiver. Otherwise, this menu is not accessible.
Functions and settings in the menu:
Backup of the file: Determine the file name for the backup file here. Press the OK button to display
a letter and number field, and use the arrow buttons and OK button to specify
the name of the backup file. Delete the last character by using the arrow buttons
to navigate to the ‘<-’ area in the letter field and press the OK button. Confirm
the input by navigating to the OK area and press the 'OK' button on the remote
control. Use the 'EXIT' button to exit the input window.
Backup on USB/HDD: Navigate with the up/down arrow buttons to this menu item and press the OK
button to start the backup.
Exit the 'Backup on USB/HDD' menu by pressing the EXIT button
To Next Page
Loading...
Need help?
General