LCD display
LCD display and FunctionsTechnical Datas
43
Consumption：＜2W
Power supply： ～240VAC 50/60Hz
Output switch: Active contact (NO) and passive contact (NO)
Max. Current
On/ Off differential temp.: 1~5℃
Transport and storage temp. : -20~60℃
Relative humidity: 10%~90% (No condensation)
Setting temp.: 5~35℃/0.5℃ per step
Accuracy: 1℃
Temp. limitation: 30~60℃(external sensor)
Wiring port: 2.5 mm²
Working temp.: 0~50℃
1. Manual control mode
LCD displays “ ”, the controller is under manual setting. In the
“ON” state, press “ ” to swich the manual control mode or time
program control mode.
2. Time control mode
LCD displays“ ”, adjust temperature of periods automatically
against time program setting. In the “ON” state, press “ ” to
switch the time program control mode or manual control mode.
3. Temporary control mode
LCD displays “ ” and “ ”, current period is manual control
mode, but next period resume to the time program control mode.
In the time program control mode, press “ ” or “ ” to enter into
temporary control mode.
Day Display
Manual Control
Time Control
Clock/
Setting Temperature/
OFF
Time Program
Heating
Menu
Reduce
Increase
Setting
Temperature Value
Power
Ambient
Temperature
20A
20 Amp Max
85
at least
To Next Page
Loading...