2.30 Programming Manual
After entering the zone address, it is checked against the list of zone
addresses that have been entered in the 3) Enter RZB panels and 4)
Enter device/zone types menus to verify that it has been identified in the
system. If the zone or device has not been previously identified in the
system, the following error message is displayed:
The program automatically detects the zone type that was previously
entered and, depending on the entries, displays the proper zone
response menu.
If the input for which you are providing a response resides in an IRC-1
panel, the following screen is displayed. This screen requires you to
identify the type of zone that you are programming.
To Next Page
Loading...
