Need help?Do you have a question about the EDWARDS SYSTEMS TECHNOLOGY IRC-3 and is the answer not in the manual?
Describes the physical controls and visual indicators on the CM1(N) unit.
Details the physical controls and visual indicators of the CM2N and CM2ND controllers.
Explains how to generate and interpret sensitivity and history reports.
Outlines the proprietary nature of the manual and legal disclaimers.
Provides FCC compliance information and potential interference warnings.
Details the CM1(N) unit's LED indicators, their colors, and meanings.
Explains the functions of the CM1(N)'s combination switch/LEDs like Reset and Alarm Silence.
Explains the use of Next/Ack, Back, and Keypad buttons for system navigation.
Describes the 40-character LCD display, its fields, and status messages.
Explains how to use the Test/Stat button to access system tests and status.
Details how to enter and manage panel addresses in test mode.
Explains how to view system, circuit, and device conditions via the status display.
Details power supply status and interpretation of ZAS-2 card status indicators.
Describes how to view the status of field panels, including communication links.
Explains how to interpret alarm, trouble, and supervisory short status displays.
Describes how to interpret output status and disabled zone information.
Explains how to view test mode status and disabled time controls.
Details how to generate a device sensitivity listing using the Test/Stat button.
Explains how to generate system, circuit, and device history reports by category.
Details the functions of the PRGM button for loading data and changing system settings.
Covers loading data via IRC-3 and changing the system date.
Explains how to change system time and manage user passwords.
Details changing communication types and rebooting the system CPU.
Explains how to enable or disable system functions using the ENABL/DSABL button.
Details enabling zones, messages, controls, panels, actions, and sequences.
Covers enabling data lines, panels, actions, and sequences for system operation.
Explains how to disable zones, messages, controls, panels, actions, or sequences.
Details how to activate specific outputs using the ACT/Reset button.
Explains how to activate system actions using the ACT/Reset button.
Details how to activate system sequences using the ACT/Reset button.
Explains how to activate smoke sensitivity levels 1 or 2.
Details how to reset specific outputs using the ACT/Reset button.
Explains how to reset system actions using the ACT/Reset button.
Details how to reset system sequences using the ACT/Reset button.
Explains how to reset a specific panel using the ACT/Reset button.
Details how to reset the verification history file using the ACT/Reset button.
Outlines operator duties for guard patrols and details walk test procedures.
Details the physical controls and visual indicators of the CM2N secondary controller.
Explains the CM2N's 7-segment LED displays for code and zone/device information.
Explains how to interpret the Zone/Device display based on installed cards.
Explains how to interpret the Zone/Device display with different card configurations.
Explains how to interpret the Zone/Device display when two ZAS-2 cards are installed.
Details the physical controls and visual indicators of the CM2ND secondary controller.
Explains the functions of the CM2ND's combination switch/LEDs like Reset and Alarm Silence.
Describes the CM2ND's LCD display for local and network messages.
Explains the functions of the Next/Ack and Back switches for display navigation and acknowledgement.
Details the information displayed on the CM2ND, including time, points, and alarm types.
Explains how to interpret the header, operation level table, and device sensitivity for ZAS-1 reports.
Provides a sample of the IRC-3 / ZAS-1 sensitivity report with data interpretation.
Introduces the ZAS-2 sensitivity report and its header information.
Details sensitivity values and levels for SIGA-IS, SIGA-PS, SIGA-PHS, and SIGA-IPHS detectors.
Provides a sample of the IRC-3 / ZAS-2 sensitivity report with device and threshold data.
Lists and describes alarm, security, short, open, alert, verify, watchdog, and restore history reports.
Explains display indicators and actions for normal and alarm system conditions.
Details actions for trouble conditions, silencing buzzers, and acknowledging messages.
Covers procedures for system reset, silencing audible devices, and initiating drills.
General| Brand | EDWARDS SYSTEMS TECHNOLOGY |
|---|---|
| Model | IRC-3 |
| Category | Security Sensors |
| Language | English |
To Next Page
