EDWARDS SYSTEMS TECHNOLOGY IRC-3 - CM1(N) System Configuration; Data Loading and Date Adjustment

Operations Manual 9
Connect extrnl data source. Press ENT key
to start, DEL key to terminate.
Access the Data Transfer Menu in the IRC-3 Data Entry Program and
follow the instructions in the IRC-3 Programming Manual (P/N
250060).
• Press the Enter button. The display shows the following:
Please wait. Loading data..._
The display returns to normal when data transfer has been completed.
Date
Changes the system date.
• Press the PRGM button. The display shows the following:
1) Load 2) Date 3) Time 4) Password 5) CommAB
6) Restart Enter # Choice ->_
The Test/Prgm LED flashes.
• Key in “2“ (Load) and press the Enter button. The display shows the
following:
Enter password level 2->_
• Key in the appropriate password and press the Enter button. The
display shows the following:
Change Date:
Enter Year (yyyy) ->_
• Key in the year (4 digits, i.e., 1994) and press the Enter button. The
display shows the following:
Change Date:
Enter Month (mm) ->_
• Key in the month (2 digits, i.e., 01=January,... 12=December) and
press the Enter button. The display shows the following:
Change Date:
Enter Day (dd) ->_
• Key in the day (2 digits, i.e., 01 through 31) and press the ENTER
button. The display shows the following:
Change Date:
Enter Day of Week (Sun=01) ->_
• Key in the day of week (01=Sunday, 02=Monday,... 07=Saturday)
and press the Enter button. The display returns to normal.
firealarmresources.com