32 Operations Manual
History Reports
History reports provide a detailed record of system activity since the
last reset verify history or system restart command was issued, or both
AC and DC power were lost. Individual reports may be requested in
the following prioritized categories:
• Alarm History:
A chronological listing of alarm point activity.
• Security History:
A chronological listing of security zone activity.
• Short History:
A chronological listing of supervisory short conditions.
• Open History:
A chronological listing of trouble conditions.
• Alert History:
A chronological listing of sensor alert warnings. This information is
useful in determining proper sensitivity settings or inappropriate
detector application.
• Verify History:
A chronological listing of analog sensors or alarm monitor modules
which have gone into the verification mode, but did not generate an
alarm. This information is useful in determining proper sensitivity
settings or inappropriate detector application. The maximum
verification count is 16. RZB zone verification is a hardware
function, and does not appear in this report.
• Watchdog History:
A chronological listing of automatic CPU resets. This is typically
due to transients received on the power and data lines due to poor
wiring practices.
• Restore History:
A chronological listing of restoration conditions.
To Next Page
Loading...
