16 Operations Manual
ACT/Reset Button
The ACT/Reset button is used to activate or de-activate system
functions.
Activate Output
• Press the ACT/Reset button. The display shows the following:
1) Activate 2) Reset
Enter # Choice->_
• Key in “1“ (Activate) and press the Enter button. The display shows
the following:
1) Output 2) Action 3) Seqnc 4) Smoke Lv.1
5) Smoke Lv.2 Enter Choice->_
• Key in “1“ (Output) and press the Enter button. The display shows
the following:
Activate Output (priority/panel#/device)
Enter Device Address (PPppdd) ->_
• Key in the priority, the panel #, and the device #, and press the Enter
button.
Example: 500207
PP = Priority = 50
pp = Panel # = 02
dd = Device # = 07
The selected device is activated. The display returns to normal.
Depending on what device was selected, the AP count will increment
by 1, and the trouble buzzer and trouble LED will activate.
Note: The output will remain activated until you reset it.
Activate Action
• Press the ACT/Reset button. The display shows the following:
1) Activate 2) Reset
Enter # Choice->_
• Key in “1“ (Activate) and press the Enter button. The display shows
the following:
1) Output 2) Action 3) Seqnc 4) Smoke Lv.1
5) Smoke Lv.2 Enter # Choice->_
• Key in “2“ (Action) and press the Enter button. The display shows
the following:
Activate an Action
Enter Action # (nnnn) ->_
To Next Page
Loading...
