EDWARDS SYSTEMS TECHNOLOGY IRC-3 - CM1(N) System Functions; ACT;Reset Button - Reset Sequence; ACT;Reset Button - Reset Panel; ACT;Reset Button - Reset Verification History

Operations Manual 19
1) Activate 2) Reset
Enter # Choice->_
• Key in “2“ (Reset) and press the Enter button. The display shows
the following:
1) Output 2) Action 3) Seqnc 4) Panel
5) Verf. Hist. Enter # Choice->_
• Key in “3“ (Sequence) and press the Enter button. The display
shows the following:
Reset a Sequence
Enter Sequence # (nnnn)->_
• Key in the 4-digit sequence # that you want to reset and press the
Enter button.
The selected sequence is reset. The display returns to normal.
Reset Panel
• Press the ACT/Reset button. The display shows the following:
1) Activate 2) Reset
Enter # Choice->_
• Key in “2“ (Reset) and press the Enter button. The display shows
the following:
1) Output 2) Action 3) Seqnc 4) Panel
5) Verf. Hist. Enter # Choice->_
• Key in “4“ (Panel) and press the Enter button. The display shows
the following:
Reset a Panel
Enter Panel # (pp)->_
• Key in the 2-digit panel address that you want to reset and press the
Enter button.
The selected panel address is reset. The display returns to normal.
Reset Verification History
• Press the ACT/Reset button. The display shows the following:
1) Activate 2) Reset
Enter # Choice->_
• Key in “2“ (Reset) and press the Enter button. The display shows
the following:
1) Output 2) Action 3) Seqnc 4) Panel
5) Verf. Hist. Enter # Choice->_
firealarmresources.com