Programming Manual 2.29
When selecting any one of the following items:
7) Supervisory output control module
9) Audible control module
A) Visual control module
Note: The UIO-12 cannot have a supervised monitor module assigned.
You must a supervised output control module for a sup. Zone.
The following screen is displayed:
Defining Devices/Zone Responses
1) Entry Menu > 5) Enter Device/Zone Responses
This step of the program is required to indicate to the system which
events are to take place when the zones/devices are in an off normal
condition. The Device Zone Response Menu is displayed as follows:
In the next window, you are prompted to enter the zone address to be
programmed.
To Next Page
Loading...
