This product has been manufactured under a quality system registered to ISO9001
Declaration of Conformity
We, Edwards,
Manor Royal,
Crawley,
West Sussex, RH10 9LW, UK
declare under our sole responsibility, as manufacturer and person within the EU authorised to assemble
the technical file, that the product(s)
AXXX – YY – ZZZ
Pump Type Variant Motor Description
XXX YY ZZZ
373 = E2M28 10 to 99 903 = 220 V, 0.75 kW
374 = E2M30 904 = 100/200 V
930 = 220 V, 0.75 kW
940 = 200-230/380-460 V, 50/60 Hz, 3 phase
981 = 115/230 V, 60 Hz
984 = 110/200-240 V, 0.75 kW – switched to High volt
986 = 110/200-240 V, 0.75 kW – switched to Low volt
to which this declaration relates is in conformity with the following standard(s) or other normative
document(s)
EN ISO 12100-2: 2003 Safety of Machinery. Basic Concepts, General Principles for
+ A1: 2009 Design. Technical Principals
EN1012-2:1996, A1: 2009 Compressors and Vacuum Pumps. Safety Requirements.
Vacuum Pumps
EN61010-1: 2001 * Safety Requirements for Electrical Equipment for Measurement,
Control and Laboratory Use. General Requirements
EN13463-1: 2009 Non-electrical equipment for use in potentially explosive
atmospheres. Basic method and requirements
EN13463-5: 2003 Non-electrical equipment for use in potentially explosive
atmospheres. Protection by constructional safety ‘c’
EN60034-1: 2004 Rotating electrical machines. Rating and performance
C22.2 No77: 1995 # Motors with inherent overheating protection
C22.2 No100: 2004 # Motors and Generators
C22.2 61010-1-04: 2004 Safety requirements for electrical equipment for measurement,
Control and laboratory use – Part 1: General requirements
UL61010A: 2002 Safety requirements for electrical equipment for measurement,
Control and laboratory use – Part 1: General requirements
UL1004: 1994# Electric Motors
* 1-phase pumps only. The pumps comply with EN 61010-1 when installed in accordance with
the instruction manual supplied with the pumps.
# 1-phase pumps only. Canadian Standards Authority and Underwriters Laboratory.
and fulfils all the relevant provisions of
2006/42/EC Machinery Directive
2006/95/EC Low Voltage Directive
2004/108/EC Electromagnetic Compatibility (EMC) Directive
94/9/EC ATEX Directive on use in Potentially Explosive Atmospheres
II 3 G c IIB T4 Internal atmospheres only – Tech File Ref: MPTR 0271
Note: This declaration covers all product serial numbers from the date this Declaration was signed
onwards.
Peter Meares, Technical Support Manager
– Industrial & Chemical
Date and Place
Add ref number here e.g. P200-00-000 Issue A
All new numbers should be logged in P-Numbers
spreadsheet on Publicit in P-Numbers folder.
P200-00-620 Issue
9 December 2009
To Next Page
Loading...
